Announcement

Collapse
No announcement yet.

Compo Mo5 ET35....?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Compo Mo5 ET35....?

    Hello all.

    I have sourced a MINT set of 7x15 Compomotive MO5 wheels shod with brand new Nankang NS2Rís, mainly for track use.
    Only issue is they are Ford fitment, 4x108 with ET35 offset.

    If I were to fit these without 20mm spacers what problems could I encounter? Would they rub the struts/calipers etc?

    Trying to justify the extra £70 for a set of spacers before buying the wheels.

    What you say fellow Puggers?

    Cheers.

  • #2
    Buy the spacers. Hubcentric.
    I used Superforma ones in days gone by.
    https://www.superforma.co.uk/blog/pe...wheel-spacers/
    Mike
    www.106maxi.co.uk
    - North West Sports & Saloons Class F 2014 Champion
    - Winner of Dave Simpson Memorial Trophy

    - Britcar 24hour 2015, 2nd in class, 14th O/A
    - Seat Supercopa

    Comment


    • #3
      That’s for the advice Mike but I ended up picking up a set of 205 speedlines with R888’s on for a good price!
      Cheers though,
      Ian.

      Comment


      • #4
        to answer the original question, at an ET of 35mm they simply wont bolt up, depending on width of course, but typically a 15" wheel will be 6 or 7" wide, the oem 15x6 used an et of 18, typically pug/citroen fit 7x15 are ET15. (for 106/205/306, 206/307used closer to 28)

        Comment

        Working...
        X